Home
Research
Teaching

Papers

2019

  1. A. Bluestein, R. Venters, D. Bohl, B. Helenbrook, G. Agmadi, “Turbulent Flow Through a Ducted Elbow and Plugged Tee Geometry: An Experimental and Numerical Study”, Journal of Fluids Engineering, Vol. 141(8) https://doi.org/10.1115/1.4042256, January 2019.

2018

  1. S. Mededovic Thagard, G. Stratton, M. Vasilev, P. Conlon, D. Bohl, “An Experimental Investigation of the Liquid Flow Induced by a Pulsed Electrical Discharge Plasma”, Invited, Plasma Chemistry and Plasma Processing, Vol. 38(4), DOI: 10.1007/s11090-018-9905-3, July 2018.

2016

  1. S. Mededovic Thagard, G. Stratton, F. Dai, C. Bellona, T. Holsen, D.G. Bohl, E. Paek, E. Dickenson, “Plasma-based water treatment: development of a general mechanistic model to estimate the treatability of different types of contaminants”, Accepted JPhysD-110632.R1 (2016).

2014

  1. M. Caso, D.G. Bohl, “Error Reduction in Molecular Tagging Velocimetry Via Image Pre-Processing”, Experiments in Fluids, Vol. 55, DOI: 10.1007/s00348-014-1802-9 (2014).

2012

  1. J.T. Hrynuk, J. Van Luipen, D.G. Bohl, “Flow Visualization of a Vortex Ring Interaction with Permeable Surfaces”, Physics of Fluids, Vol. 24, n 3, DOI: 10.1063/1.3695377, Article number: 037103, 2012.
  2. J.T. Hrynuk, J. Van Luipen, D.G. Bohl, “Flow Visualization of a Vortex Ring Interaction with Permeable Surfaces”, Physics of Fluids, Vol. 24, n 3, DOI: 10.1063/1.3695377, Article number: 037103, 2012.

2011

  1. D.G. Bohl, N. Santitissadeeekorn, A. Mehta and E. Bollt, “Characterization of Mixing Using Experimentally Derived Velocity Fields and Lagrangian Coherent Structures in a Simple Paddle Mixer,” Journal of Fluids Engineering, Vol. 133, No. 6, Article nymber: 061202 (2011).
  2. J. Ke and D.G. Bohl, “Effect of Experimental Parameters and Image Noise on the Error Levels in Simultaneous Velocity and Temperature Measurements Using Molecular Tagging Velocimetry/Thermometry (MTV/T)”, Experiments in Fluids, Vol. 50, No. 2, pp. 465-478 (2011).

2009

  1. D.G. Bohl and M.M. Koochesfahani, “MTV Measurements of the Vortical Field in the Wake of an Airfoil Oscillating at High Reduced Frequency,” Journal of Fluid Mechanics, Vol. 620, pp. 63-88 (2009).
  2. D.G. Bohl, M.M. Koochesfahani, “MTV Measurements of the Vortical Field in the Wake of an Airfoil Oscillating at High Reduced Frequency”, Journal of Fluid Mechanics, Vol. 620, pp. 63-88, 2009.
  3. N. Santitissadeekorn, D.G. Bohl, E. Bollt, “Analysis and Modeling of an Experimental Device by Finite-Time Lyapunov Exponent Method”, Journal of Bifurcation and Chaos, Vol. 19, No. 3, pp. 993–1006, 2009.
  4. N. Santitissadeekorn, D.G. Bohl and E. Bollt, “Analysis and Modeling of an Experimental Device by Finite-Time Lyapunov Exponent Method,” Journal of Bifurcation and Chaos, Vol. 19, No. 3 (2009).

2008

  1. D.G. Bohl, R. Lee and E. Palmero, “Break-Up and Performance of Reactive Materials,” D.G. Bohl, R. Lee, E. Palmero, “Break-Up and Performance of Reactive Materials”, JANNAF Journal, Vol. 1 (May 2008).

2007

  1. D.G. Bohl, “Experimental Investigate of the Fluid Motion in a Batch Mixer Driven by a Flat Plate Impeller,” Journal of Fluids Engineering, Vol. 149, No.6, pp.137-146 (2007).
  2. D.G. Bohl and G. Jackson, “Experimental Study of the Spill and Vaporization of a Volatile Liquid,” Journal of Hazardous Materials, Vol. 140, No. 1-2, pp. 117-128 (2007).

2006

  1. D.G. Bohl and R.J. Volino, “Experiments With Three Dimensional Passive Flow Control Devices on Low Pressure Turbine Airfoils,” Journal of Turbo Machinery, Vol. 128, pp. 251-260 (April 2006).

2004

  1. D.G. Bohl and M.M. Koochesfahani, “MTV Measurements of Axial Flow in a Concentrated Vortex Core,” Physics of Fluids, Vol. 16, No. 11. pp. 4185-4191 (2004).

2002

  1. D.G.Bohl, “Experimental Study of the 2-D and 3-D Structure of a Concentrated Line Vortex Array,” Michigan State University, Doctoral Dissertation (2002).

2001

  1. D.G.Bohl, M.M.Koochesfahani and B.J.Olson, “Development of Stereoscopic Molecular Tagging Velocimetry,” Experiments in Fluids, Vol. 30, No.3, pp 302-308 (2001).

1999

  1. D.G.Bohl and J.F.Foss, “Near Exit Plane Effects Caused by Primary-Plus-Secondary Tabs,” AIAA Journal, Vol. 37, No.2, pp.192-201 (1999).

Conference Proceedings

2013

  1. Hrynuk, D.G. Bohl, “Investigation of the Interaction of Vortex Rings and Thin Porous Screens Using Molecular Tagging Velocimetry (MTV)”, Proceedings of the FEDSM2013, ASME 2013 Fluids Engineering Division Summer Meeting, Incline, NV, July 7-11, 2013.
  2. D.G. Bohl, A. Green, K. Kuzmich, “Application of Molecular Tagging Velocimetry to Two-Phase (Gas/Liquid) Flows”, Proceedings of the FEDSM2013, ASME 2013 Fluids Engineering Division Summer Meeting, Incline, NV, July 7-11, 2013.

2011

  1. P. Kabiri, D.G. Bohl, and G. Ahmadi, “The Effects of Orifice Angle and Cavity Dimension on Rectangular Synthetic Jet Actuators”, Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition, Denver, CO, November 11-17, 2011.
  2. D.G. Bohl, B. Helenbrook, B. Kanya, K. Visser, R. Marvin, B. Mascarenhas, M. Parker, and D. Rocky, “Analysis and Design of a Wind Turbine with a Wind Accelerator”, 29th AIAA Applied Aerodynamics Conference, Honolulu, Hawaii, June 2011.

2010

  1. B. Alstrom, P. Kabiri, P. Marzocca, D.G. Bohl and G. Ahmadi, “Synthetic Jet Actuator Design and Characterization – A Combined Experimental and Computational Study,” Proceedings of ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels and Minichannels, Montreal, Canada, August 1-5, 2010.

2009

  1. J. Kehs, D.G. Bohl, G. Ahmadi and B. Tavakoli, “Experimental Study of Airflow Around the Syracuse COE Building”, Proceedings of FEDSM2009, ASME 2009 Fluids Engineering Division Summer Meeting, Vail, CO August 2-5, 2009.
  2. B. Tavakoli, G. Ahmadi, D.G. Bohl and J. Kehs, “Computational Modeling of Airflow and Particulate Pollutant Transport Around the Syracuse COE Building”, Proceedings of FEDSM2009, ASME 2009 Fluids Engineering Division Summer Meeting, Vail, CO August 2-5, 2009.

2008

  1. S.E. Powers, B. Brydges, P. Turner, G. Gotham, J.J. Carroll and D.G. Bohl”Successful Institutionalization of a K-12 – University STEM Partnership Program”, Proceedings of the 115th Annual ASEE Conference & Exposition, Pittsburgh PA, June, 2008.

2006

  1. R.J. Lee, K.E. Newman, D.T. Knutson, N. M. McGregor and D.G. Bohl, “Combined Air Blast and Quasi-Static Overpressure Assessment for Pressed Aluminized Explosives”, Proceedings of the 13th International Detonation Symposium, Norfolk, VA, July 23-28, 2006.
  2. D.G. Bohl and R.J. Lee, “Study of the Break-Up and Impact of a Metal/Polymer Composite Material in a Two-Step Process”, Proceedings of the 37th International ICT Conference, Karlsruhe, Germany, June 27-30, 2006.

2005

  1. R.J. Lee, W. Mock, J.R. Carney, W.H. Holt, G.I. Pangilinan, R.M. Gamache, J.M. Boteler, D.G. Bohl, J. Drotar and G.W. Lawrence, “Reactive Materials Studies”, Proceedings of the 14th APS Topical Conference on Shock Compression of Condensed Matter, Baltimore, MD (July 31-August 5, 2005).
  2. R.J. Volino and D.G. Bohl, “Structure of Oscillating Vortex Generator Jets”, Proceedings of the 4th International Symposium on Turbulence and Shear Flow Phenomena, Williamsburg, VA, June 27-29, 2005.
  3. D.G. Bohl and R.J. Volino, “Experiments With Three Dimensional Passive Flow Control Devices on Low Pressure Turbine Airfoils”, Proceedings of ASME Turbo Expo 2005, Paper GT2005-68969, Reno, NV, June 6-9, 2005.

2004

  1. R.J. Volino, D.G. Bohl, “Separated Flow Transition Mechanism and Prediction with High and Low Freestream Turbulence Under Low Pressure Turbine Conditions”, Proceedings of ASME Turbo Expo 2004, Paper GT2004-53360, Vienna, Austria, June 14-17, 2004.

2003

  1. D.G. Bohl and M.M. Koochesfahani, “MTV Measurements of the Flow Structure Downstream of an Oscillating Airfoil”, AIAA-Paper 2003-4017, 2003.
  2. D.G. Bohl and M.M. Koochesfahani, “MTV Measurements of Axial Flow in Concentrated Vortex Cores”, AIAA-Paper 2003-0425, 2003.

2002

  1. M.M. Koochesfahani and D.G. Bohl, “Molecular Tagging Visualization and Velocimetry of the Flow at the Trailing Edge of an Oscillating Airfoil”, Proceedings of the 10th International Symposium on Flow Visualization, Kyoto Japan, August 26-29, 2002.

2000

  1. C. Somerton, D. Bohl, M. Crimp, “Development of an Engineering Teaching Certificate Program”, Proceedings of the ASEE 2000 Spring Conference North Central Section, Michigan State University, East Lansing, MI, March 30-April 1, 2000.

1997

  1. C.P. Gendrich, D.G. Bohl, M.M and Koochesfahani, “Whole-Field Measurement of Unsteady Separation in a Vortex Ring/Wall Interaction”, AIAA Paper 97-1780, 1997.

Theses and Dissertations

2020

  1. An Investigation of the Induced Flow in a Gas Discharge Plasma Reactor, Patrick Conlon

2019

  1. Development of an Optical Particle Sizing System for Field Testing, Colin Stutz
  2. Experimental investigation into single and two phase turbulent flows through an elbow and tee junction using particle image velocimetry (PIV) and refractive index matching (RIM), Andrew Bluestein

2017

  1. Analysis of a vortical structures in the wake of an oscillating airfoil using Gaussian vortex modeling and multiple objective optimization scheme, Sami Dwaud

2016

  1. Experimental study of turbulent flow through an elbow and tee junction using particle image velocimetry (PIV), Andrew Bluestein
  2. Experimental Study of Dynamics stall on a finite span wing, Wyatt Spellman

2015

  1. The Effect of Leading edge tubercles on dynamic stall, John Hrynuk

2012

  1. Feasibility Study of Scalloped Fin for Wind Turbine, Vanora O’LoughLin
  2. The interaction of ring vortices with thin porous screens, John Hrynuk
  3. Active Flow Control over a NACA 0015 Airfoil by Synthetic Jet actuators, Pooya Kabiri

2011

  1. MTV Measurement in fully developed bubbly two phase flow, Adam Green

2010

  1. Patel Sumit

2009

  1. Effects of Experimental parameters and image noise on the error levels in simulaneous velocity and temperature measurements using molecular tagging velocimetry/thermometry (MTV/T), Jianghua Ke
  2. Experimental study of airflow around the Syracuse CoE building, Joshua Kehs

2008

  1. Bradford White
  2. Experimental study of mixing characteristics at low reynolds number in a simple batch mixer, Akshey Mehta
  3. Pressure distributions drag measurements and velocity profiles around smooth and corrugated cylinders of finite span, Michael Parker